Beru

OEM Rotor (Modified No Resistor) for all 4 and 6 cyl 123 applications

This is a modified no resistor rotor. We start with a new Rotor, remove and replace the resistor with a solid piece of copper wire. It can be used on all 123ignitions. The intended purpose is to...

OEM Rotor for all 4 and 6 cyl 123 applications

This is the Factory OEM Rotor KW 5026 that comes with all 4 and 6 cylinder 123ignitions. Note the step in the ID of the rotor on the right, which matches the step on the post where it mounts. Gives...

Cap for 4cyl Old Style 123 made before 2012 w/ Bottom Access to the switch

Example of Old style tabbed housing. Fits VK105 Cap with a notch. Black only - Read on some adjustment may be necessary. 4cyl Cap and Rotor Combination Brown Only (This Cap is Notched to accept...

4cyl cap and rotor combination for Old Style 123 w/ Bottom Access to the switch

Example of Old Style Housing to fit this VK105 - Read on BLACK ONLY - 4cyl Cap and Rotor Combination (This Cap is Notched to accept the locating tab on older 123ignitions) Because of tooling...

NOS OEM 4 cyl cap for Datsun, Honda, Subaru

    NOS 4cyl Cap to fit Datsun, Honda, Subaru. Part Number 174-3004 Note: WILL NOT FIT 123Ignitions

Cap 4 cyl for 123ignitions made 2012 and later

  If your housing looks like this you will need the VK106 or equivalent cap. There is also a date stamp just above where the power supply wires enter the body. Comes in Black or Brown 4cyl...

4cyl cap and rotor combination for 123Ignitions 2012 and up

4cyl Cap and Rotor Combination to fit the newer side access 123ignition bodies. Choose Black or Brown. Note: on side access 123Ignition bodies there is an adjustable tab to enable the fitment of...

Cap 6 cyl for 123ignitions

6 cyl Cap only

6 cyl cap and rotor combination for 123ignitions

  Comes with OEM rotor (5.04 ohms resistance)   Add modified rotor (no resistance - race application)