Beru

OEM Rotor (Modified No Resistor) for all 4 and 6 cyl 123 applications

This is a modified no resistor rotor. We start with a new Rotor, remove and replace the resistor with a solid piece of copper wire. It can be used on all 123ignitions. The intended purpose is to...

OEM Rotor for all 4 and 6 cyl 123 applications

This is the Factory OEM Rotor KW 5026 that comes with all 4 and 6 cylinder 123ignitions. Note the step in the ID of the rotor on the right, which matches the step on the post where it mounts. Gives a...

Cap 4 cyl for 123ignitions made 2012 and later

  If your housing looks like this you will need the VK106 or equivalent cap. Comes in Black or Brown 4cyl Cap to fit the newer side access 123ignition bodies. Note: on side access...

4cyl cap and rotor combination for 123Ignitions 2012 and up

4cyl Cap and Rotor Combination to fit the newer side access 123ignition bodies. Choose Black or Brown. Note: on side access 123Ignition bodies there is an adjustable tab to enable the fitment of...

Cap 6 cyl for 123ignitions

6 cyl Cap only

6 cyl cap and rotor combination for 123ignitions

  6 cyl cap and rotor combination