Product Description
Please specify in the comments if you need the E21 as we have a reverse oil groove specifically for the rotation.
From time to time due to increased crankcase back pressure a 123ignition may see oil being introduced into the PCB area. This condition is often caused by cracked rings or some catastrophic engine failure and must be addressed. It is possible to save the 123 with a good cleaning and replacing the bottom bushing and seal. However it is not guaranteed as microscopic metal from the oil can foul the pcb beyond repair.
We have designed a new shaft patterned after the original Bmw shaft with the reverse oil groove. It is our goal that with this design change and the new seal and bushing oil intrusion will be greatly reduced if not eliminated. There is no guarantee.
Simply purchase this service and send your 123ignition along with a copy of your receipt to:
123ignitionusa
23448 Royalton Rd
Columbia Station, Ohio 44028
We will clean and inspect your unit then contact you if there are any further issues that need to be addressed while replacing the Shaft, Bushing and Seal.
