Product Description
Here is a contributed curve for the 2.0, 2.2 DESCRIPTION The wireless programmable 123\TUNE+-6-R-V-POR911-SMALL is designed for Porsche 911 2,0L and 2,2L 6 cylinder engines. Suitable for engines without HKZ (CDI) unit and first generation HKZ unit ( 3 wires ) Warning: Don’t use the original HKZ (CDI) coil direct on the 123ignition. 123ignition is proud to announce the first fully programmable wireless ignition! Control your 123\TUNE+ with your iOS/Android smartphone or tablet. The App makes it possible to adjust the ignition curve and shows an electronic dashboard. Main features: REV-counter, Antitheft system by a PIN code, Real time tuning, Vacuum advance, Vacuum retard, Soft REV-limiter, etc. Specifications Cylinders: 6 Directions: CW/CCW Voltage: 4,0 - 15,0 volt Range: 500 - 8000 rpm Temperature: -30 to 100 Celsius Coil: stock or High Energy coil, primary coil NOT below 1,0 ohm Dwell: constant current, fully autom. Time-out: after 1 second current is switched off Spark-bal: <0,5 degr. crankshaft Vacuum: Programmable: -20 / +20 degrees. Curve: Wireless programmable with Android or iOS app Max. Advance: 45 degr. crankshaft Wiring: red = +6V or +12V, black = '-' coil, blue = chassis ground Earth type: Suitable for negative and positive earth systems Installation manual
Product Videos
Videos Hide Videos Show Videos
Custom Field
Product Reviews
3 Reviews Hide Reviews Show Reviews
-
PORSCHE 911 BT TUNE+ 2.0, 2.2 (1965-1977) WORKS WITH OR W/O 3 PIN HKZ (NOT 6 PIN) BLUETOOTH PROGRAMMABLE
A very high quality unit, looks great! Easy to install and setup. Highly recommend. Mine is installed on a 1970 911T. Nice to have state of the art components.
-
distrib
very well designed and built,quality product
-
Porsche 911 small diam shaft dist.
This dist. is the nicest looking, easily installed and programed pieces we have ever worked with! We love that it uses the OEM cap and rotor. What we didn't like was the tight clearance of the hold down nut to the dist. body. we had to use a jam nut to give us proper clearance to bolt it down. Interesting! Thanks Will I will pass it along to the mfg. Can you provide a picture and email it to me?