Example of Old style tabbed housing.
Fits VK105 Cap with a notch. Black only - Read on some adjustment may be necessary.
4cyl Cap and Rotor Combination Black Only (This Cap is Notched to accept the locating tab on older 123ignitions) The tab on your old 123 will probably need to be filed to make the side to side width about 1/2mm smaller because of tooling changes.
All newer 123Ignitions with side access to the switch or USB connection have an adjustable tab on the side of the housing to enable them to accept either the Tabbed VK 106 Beru cap or the Notched VK 105 cap.
If you have an older style 123ignition and would like to fit an angled cap or a tabbed cap like the VK106 you will need to notch the housing. It can easily be done with a Dremmel tool and a cutting wheel.
1 Review Hide Reviews Show Reviews
I ordered a Beru VK105 cap but received a VK1051. It does not fit the old style distributor which I purchased from you in March, 2008. The old carton that I saved in 2008 indicates a number for the VK105 as 0 330 920 005. Sorry Cecil, You are welcome to return it. There is a slight difference in the machined width of the tab that some have experienced. Most just pass a file along the edge. Another thought is if you have a dremel with a metal cutting wheel. Take 1/2mm off the side and you will be good from here on out. That number VK105 has been superseded with the one you received. I understand if you would like to return it. Hope this helps Ed