OEM Rotor (Modified No Resistor) for all 4 and 6 cyl 123 applications

This is a modified no resistor rotor. We start with a new Rotor, remove and replace the resistor with a solid piece of copper wire. It can be used on all 123ignitions. The intended purpose is to...

OEM Rotor for all 4 and 6 cyl 123 applications

This is the Factory OEM Rotor KW 5026 that comes with all 4 and 6 cylinder 123ignitions. Note the step in the ID of the rotor on the right, which matches the step on the post where it mounts. Gives...

Cap for 4cyl Old Style 123 w/ Bottom Access to the switch

Example of Old style tabbed housing. Fits VK105 Cap with a notch. Black only - Read on some adjustment may be necessary. 4cyl Cap and Rotor Combination Black Only (This Cap is Notched to accept...

4cyl cap and rotor combination for Old Style 123 w/ Bottom Access to the switch

Example of Old Style Housing to fit this VK1051 - Read on BLACK ONLY - 4cyl Cap and Rotor Combination (This Cap is Notched to accept the locating tab on older 123ignitions) Because of tooling...

Cap 4 cyl for new style 123Ignition Bodies (Side Access)

  If your housing looks like this you will need the VK106 or equivalent cap. Comes in Black or Brown 4cyl Cap to fit the newer side access 123ignition bodies. Note: on side access...

4cyl cap and rotor combination for new style 123Ignition Bodies (Side Access)

4cyl Cap and Rotor Combination to fit the newer side access 123ignition bodies. Choose Black or Brown. Note: on side access 123Ignition bodies there is an adjustable tab to enable the fitment of...

Cap 6 cyl for 123ignitions

6 cyl Cap only

6 cyl cap and rotor combination for 123ignitions

  6 cyl cap and rotor combination